30 mA (buzzer & relay energized, 2 sensors) Power Consumption . 1 watt (with internal sensors) ... Three channel, internal electrochemical 6-year carbon monoxide (CO) sensor (0 - 200 ppm range) and internal electrochemical 6-year nitrogen dioxide (NO2) sensor (0 - 10 ppm), must add ESH-A remote sensor, LCD display, Modbus® RS-485 communication, 2 A @ 30 VAC / VDC SPDT relay, …
The Carbon Monoxide (CO) Detectors have a built-in electrochemical Carbon Monoxide (CO) sensor and have 5 years life time expectancy in normal operation enviroment. Numbers of Carbon Monoxide (CO) Detectors per square meter is …
Relay’s HemoPalm IP enables the integration of spectroscopically- measured CO-oximetry with classical electrochemical sensor measurements of blood gases, electrolytes, and metabolites, all from the same whole blood sample on the same unit-use cartridge measured rapidly using a small, portable instrument.
TR2000 – Electrochemical CO Transmitter Low Cost – Long Life – Low Profile The TR-2000 delivers all the advantages of electrochemical sensing in a durable, long life (5 year) package that is priced to compete against less accurate MOS/Solid State sensors. The loop powered sensor delivers a linear 4-20 ma output that is easily integrated into any building control, ventilation or alarm ...
Carbon monoxide (CO) is an invisible intruder that threatens lives in nearly every home and sends 20,000 people to the ER with CO poisoning each year. Our hardwired CO detectors with RealTest use electrochemical sensors to measure carbon monoxide levels and alert residents with a flashing Temp-4 signal alarm—but that’s not all. System-connected carbon monoxide detectors offer guaranteed 24 ...
The Kele KCOC Series Combination Carbon Monoxide Sensors pair a CO sensor with a CO2, RH, or VOC sensor in the same enclosure-reducing installation time and space required. The unit provides visual indication and analog output of CO levels in enclosed spaces such as schools, offices, malls, and theaters. The analog output is available for 0-10V or 4-20 mA and is scaled from 0-200 ppm of CO.
Carbon Monoxide Detectors with RealTest® Technology The System Sensor CO1224T, CO1224TR, and CO1224A (Canada) Carbon Monoxide (CO) Detectors use a highly accurate and reliable electrochemical sensing cell to provide early warning of dangerous CO levels. Features • A 10-year end-of-life timer • RealTest® enables a functional test using canned CO • A code-required trouble relay ...
Wall-mounted gas monitor with built-in carbon monoxide (CO) sensor,accepts one analog remote device such as a secondary gas sensor,temperature or humidity sensor.
CO1224 carbon monoxide (CO) detectors with RealTest® use a highly accurate and reliable electrochemical sensing cell to provide an early warning of dangerous CO levels. They are designed for system operation. These detectors offer a code-required trouble relay to send a sensor failure or end-of-life signal to the control panel and the central station. The CO detectors also use SEMS-type ...
TR2000 – Electrochemical CO Transmitter Low Cost – Long Life – Low Profile The TR-2000 delivers all the advantages of electrochemical sensing in a durable, long life (5 year) package that is priced to compete against less accurate MOS/Solid State sensors. The loop powered sensor delivers a linear 4-20 ma output that is easily integrated into any building control, ventilation or alarm ...
CO alarm relay setpoint 100ppm (default), 0-200ppm (menu selectable) ... CO Sensor Performance Type Electrochemical Accuracy +/-10% of full scale @ 20oC Reproducibility <+/-2% of reading Response time <15 seconds Certifications UL2034 recognized Long term stability <+/-5% per year Life expectancy >5 years NO2 Sensor Performance Type Electrochemical Accuracy +/-10% of full scale …
Figaro Electrochemical-type gas sensor are amperometric fuel cells with two electrodes. The basic components of two electrode gas sensors are a working (sensing) electrode, a counter electrode, and an ion conductor in between them. When toxic gas such as carbon monoxide (CO) comes in contact with the working electrode, oxidation of CO gas will occur on the working electrode through chemical ...
A status LED is green when the measured CO is below the lowest relay setpoint. The LED turns red whenever an alarm relay is on. An alarm timer holds the output relays on for a field selectable time 0 to 10 minutes after the CO level has fallen below 80% of setpoint. Field Replaceable Long Life Electrochemical Sensor
Electrochemical CO Sensor Module ZE07-CO. ZE07-CO is a general-purpose and miniaturization electrochemical carbon monoxide detection module. It utilizes electrochemical principle to detect CO in air which makes the module with high selectivity and stability. Built-in temperature sensor can do temperature compensation; and it has digital output ...
Sensor Type: Long life, electrochemical CO sensors Enclosure: ASA 61 gray enameled 16 gauge steel Supply Voltage: 120 VAC, 60 Hz Relay Contacts: Two DPDT 10A @ 250 VAC Res. max relays, for two thresholds Calibration: 0‐100 ppm CO
2018-10-15· The Theory Behind Carbon Monoxide Electrochemical Sensors Published with permission from TSI Application Note Figure 1: Schematic of Electrochemical Sensor and Circuit. Application Note Since electrochemical sensors work with the same theory but different materials, we have described only how the CO sensor …
Description: life The CO sensor is an electrochemical sensor. It gives you a sensor life of 2 years with a drift Rate of 5%/yr. The drift can be corrected via calibration using a calibration gas if necessary. The RH capacitance sensor is durable and can be Analyzer Technology: Electrochemical, Other; Application: Ambient Air Monitoring; Display: Digital; Electrical Outputs: Analog Current ...
Electrochemical sensors use a gel to detect CO. Electrochemical sensors are mainly used to detect Oxygen and toxic gas. They measure a chemical reaction within the sensor that creates an electrical output proportional to the CO level. Essentially, EC sensors …
Greystone CMD Carbon Monoxide Gas Detectors. Environmental, industrial and commercial indoor Carbon Monoxide (CO) gas detectors. • Space or duct mount models • Long-life electrochemical sensor • Various analog outputs • LCD display • Optional relay outputs & audible alarm • BACnet or Modbus communication
The 2GIG CO8-345 is a wireless and fully supervised Carbon Monoxide (CO) detector. The detector is 3V battery powered (CR123A Panasonic battery) and outfitted with an electrochemical carbon monoxide sensor. Like any CO detector, there is a 5-year ‘end-of-life’ from the manufactured date. When the detector has reached the end of its life, the yellow LED blinks once every 23 seconds and ...
CO Sensor/Controller Stand-alone or with multiple units, controls VFDs or across the line fans directly LCD display with intuitive set up menu Integrated set-point and alarm relays DESCRIPTION Senva CO Series carbon monoxide sensors maximize energy savings, while ensuring optimal ventilation. These sensors measure and control the amount of CO present in a location. The unit can act as stand ...
The System Sensor CO1224T and CO1224TR (round) Carbon Monoxide (CO) Detectors use a highly accurate and reliable electrochemical sensing cell to provide early warning of dangerous CO levels. With RealTest® technology, the CO gas sensing cell used in the CO1224T and CO1224TR CO detectors can be tested using a CO gas agent, fully meeting
Optional on board relay Easy to calibrate in the field $ $ Categories: Air & Gas, BACnet, Carbon Monoxide, Gas Detection. Features Related Documents Product Description. The CMD series carbon monoxide detector uses an electrochemical sensor to monitor the carbon monoxide level and outputs a factory calibrated 4-20 mA, 0-10 Vdc, or Modbus signal. Optionally, the device may be ...
• One (1) built-in CO electrochemical sensor • Easy plug-in sensor • One (1) remote analog input, 4-20 mA • One (1) digital input • Two (2) relay outputs: - Four stage control - Fail-safe assignable • One (1) analog output, (0)4-20 mA / (0)2-10 VDC - Selectable for low, high, or averaging • One (1) 24 VDC switched output • Liquid Crystal Display (LCD) • LED status indicators ...
Professional gas sensing solution supplier with over 30-year gas sensor manufacturing experience
Contact Us